• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Icom IC-F80DT Front Case Replacement

Status
Not open for further replies.

ka9rxk

Member
Joined
Dec 19, 2002
Messages
41
Location
60131
Has anyone ever tried replacing the front case on an Icom IC-F80DT? I have downloaded the service manual, and have found the part number:

8210021800 - 2803 T-Front Panel (IC-F80DT/T)

The disassembly looks to be straightforward enough, but it's always nice to learn from someone who's done it before.

Also, any idea on how much this part costs?
 

Larryfire26

Member
Premium Subscriber
Joined
Mar 18, 2008
Messages
63
Location
Hudson Valley NY
Its not an easy replacement and you MUST DISCONNECT THE RIBBON CABLES BEFORE YOU DO ANYTHING ELSE!!! These are the ribbon cables that interconnect the boards!

Also watch the display its very fragile and Icom stated that they do not have those in stock!!


larry
 
Status
Not open for further replies.
Top