• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Installing ID880-H in 2014 Jeep Cherokee

Status
Not open for further replies.

WB4UR_Sean

Member
Joined
Jan 18, 2015
Messages
23
Location
Amelia, VA
Before I install my Icom ID880-H into my 2014 Jeep Cherokee, I would like some helpful hints.

-Routing the power cable from the battery to the radio location.
-mounting the control head using the supplied hardware.
-locating the main radio unit nearby away from the main dashboard.
-using EMI chokes/filters on the power and coax cable to keep from interfering with the electronics/airbags.

Tnx :)
73s
de
KD4ADV
 

VE7JMR

Member
Joined
Oct 7, 2015
Messages
1
Kenwood TH-D710GA

I to have a 2014 Jeep Cherokee and am looking to install a Kenwood TM-D710GA. I have a Comet SSB5-NMO antenna but am having difficulties determing where to mount it as the curved hood edge seems to preclude a fender bracket.

Have you had success isntalling your ID880-H?
 
Status
Not open for further replies.
Top