• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Interior Mounting Solutions for GMRS Handheld

OldEastSider

Member
Joined
Aug 22, 2018
Messages
8
Location
Dandridge, TN
Does anyone know of a well built, low profile interior car mount for a Wouxun GMRS handheld?

I like some of the magnetic mounts used for for cellphones, but these probably wouldn't stand up to a bulkier and heavier radio. The cupholder mounts seem to be made of cheap plastic and probably wouldn't last long either. I've checked online and there's nothing suitable.

It's a lease car so drilling is out of the question. It's a 2019 Camry and there's hardly a flat surface on the dash. Gimme an old Jeep anyday!

Any ideas welcome.
 

OhSixTJ

Member
Joined
Feb 9, 2014
Messages
201
Maybe one of these?

 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
13,874
Location
SNCZCA01DS0
Panavise has a number of options, also:

Ram Mounts may have a few options:
 

Ravenkeeper

Member
Joined
Sep 26, 2016
Messages
189
Location
Antelope Valley, CA
Maybe one of these?

I had a similar one for my cellphone, it crapped out after about 4 years. Just saying.
 

cmdrwill

Member
Joined
Mar 30, 2005
Messages
3,776
Location
So Cali
Weather Tec the auto truck floor mat maker has a cup holder. Looks sturdy to me and locks in.
 
Top