CalgaryScanner
Member
- Joined
- Aug 6, 2004
- Messages
- 5
Hello fellow scanner enthusiasts,
I have a BCD396T with new firmware (3.02.02)
I monitor other Motorola Type II systems but can't seem to get anything with the Palm Springs, CA system.
Following is the most updated information from RR.
System Name: Palm Springs
Location: Palm Springs, CA
County: Riverside
System Type: Motorola Type IIi Hybrid
System Voice: Analog
Last Updated: June 22, 2011, 10:37 am (Updated General Trunked System Information)
System ID List
System ID Connect Tone
3d1b Unknown
System Fleetmap
Type B0 B1 B2 B3 B4 B5 B6 B7
Mot D D D D D D D
TT S4 S4 S4 S4 S4 S4 S4
-------
I have set the system as a Motorola Type 2 800 and I manually set the fleetmap to match the one shown above.
I've confirmed the Freqs as 857.48750 858.48750 858.96250 859.48750a 860.71250c
I've confirmed the TGs as
32784
32816
32880
32912
32944
But it's just wind and crickets on the scanner. Nothing.
Any advice is most appreciated.
I have a BCD396T with new firmware (3.02.02)
I monitor other Motorola Type II systems but can't seem to get anything with the Palm Springs, CA system.
Following is the most updated information from RR.
System Name: Palm Springs
Location: Palm Springs, CA
County: Riverside
System Type: Motorola Type IIi Hybrid
System Voice: Analog
Last Updated: June 22, 2011, 10:37 am (Updated General Trunked System Information)
System ID List
System ID Connect Tone
3d1b Unknown
System Fleetmap
Type B0 B1 B2 B3 B4 B5 B6 B7
Mot D D D D D D D
TT S4 S4 S4 S4 S4 S4 S4
-------
I have set the system as a Motorola Type 2 800 and I manually set the fleetmap to match the one shown above.
I've confirmed the Freqs as 857.48750 858.48750 858.96250 859.48750a 860.71250c
I've confirmed the TGs as
32784
32816
32880
32912
32944
But it's just wind and crickets on the scanner. Nothing.
Any advice is most appreciated.