Jackson County Fire PL's for Tower Sites

Status
Not open for further replies.
Joined
Jan 14, 2005
Messages
27
Reaction score
0
Hello, I was wondering does anyone have the tx pl's for the jackson county towers near Fisher's Ridge and Near Ravenswood, I have the pl's for the main tower just need the tx for the other two sites. Also, if you have the pl's for ems that would be great too. I would greatly appreciate the help.

Thanks
 

wv8mat

Member
Premium Subscriber
Joined
Oct 11, 2006
Messages
1
Reaction score
1
Location
Letart, WV
good luck. i know people that are fire and ems up there and they cant get the pl or dpl codes. haha
 

mike_s104

Member
Premium Subscriber
Joined
Aug 25, 2004
Messages
4,814
Reaction score
36
Location
Berkeley Co. WV/ Loudoun Co. VA
I have a few questions...

1. aren't they listed in the RR DB?
2. can you put your scanner in search for the PL?
3. why do you need the TX PL and not just the RX? most cases they are the same.

If you have a radio to transmit on the freqs, then if it's legit, the radio should be programmed with the correct PLs from whomever handles the programming.
 

rfburns

Member
Premium Subscriber
Joined
Nov 19, 2002
Messages
1,029
Reaction score
2
does anyone have the tx pl's for the jackson county towers near Fisher's Ridge and Near Ravenswood
Are you asking for the DPL for the transmit side of the mobile or for the DPL of the transmit side of the fixed station?
 

wv8mat

Member
Premium Subscriber
Joined
Oct 11, 2006
Messages
1
Reaction score
1
Location
Letart, WV
i live in mason county right next to jackson co and we have like 5 fire and 5ems repeater channels for them all with different dpl for rx.
 
Joined
Jan 14, 2005
Messages
27
Reaction score
0
the dpl codes on transmit

the codes i'm looking for is the transmit for their repeater sites i think there are 3 maybe 4 for both fire and ems and I know the receive pl is the same for for each site meaning u can hear the traffic off all the towers on the channel that your on, just changing the dpl transmit pl allows for tower change. just need the transmit pls for ems and fire. I know that I only have the main ems and main fire tx and receive because they are the same for that location not the other locations. so if you can help that would be great.

thanks
 

wv8mat

Member
Premium Subscriber
Joined
Oct 11, 2006
Messages
1
Reaction score
1
Location
Letart, WV
i know with our vhf radio we use for emergency use we have five ems and five fire repeaters for jackson co. i am unable to get the programming on it due to the way our consoles are made , the radio is i guess built in to it somehow. i just know the dispatcher pushes the button and talks and jackson hears us,lol
 
Status
Not open for further replies.
Top