• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Jagaur 725 M

Status
Not open for further replies.

djones87401

Captain CodePlug
Joined
Sep 4, 2011
Messages
190
Location
Cedar Crest, NM
So I am programing my jagaur 725m and the first 4 systems no problem. the last two when I switch to them on the radio it tells me INV SYS.... I checked the programing and can't find anything wrong. I have 3 lpe200s that are programed the same with no issues and I have 1 Orion with the same programing loaded with no issues so I am stumpped.... Any ideas
 

djones87401

Captain CodePlug
Joined
Sep 4, 2011
Messages
190
Location
Cedar Crest, NM
OK I read that but I still don't get it. I have 7 systems with that are not full of channels or groups. I also was able to add two conv. channels no trouble. I know I dont't have 128 channels or groups in this radio.
 

djones87401

Captain CodePlug
Joined
Sep 4, 2011
Messages
190
Location
Cedar Crest, NM
OK I was wrong I just went and added all the things up. Yep I have way more than 128 system groups loaded. Thanks for the help
 
Status
Not open for further replies.
Top