KCP&L VHF DMR, trying to figure it out using DSD

[mancow]

This is what I see from my location and I'm trying to figure out how to figure it all out. DSD shows:
Constantly transmitting control channels:
152.0375 L1-1.6
152.0675 L1-2.8
152.0825 L1-2.6
152.1725 L1-3.3
152.2025 L1-1.2
153.3200 L1-3.7

Voice channels that come and go, some in pairs:

152.5925
152.8025
152.6675
152.7275
152.5175
152.6375
163.5600 (not sure if this is correct)

So, how should I go about trying to piece this together? What do the L1 and 1.2, 3.7 etc...numbers mean?

In DSD I see channels pop up when monitoring the voice frequencies but I don't understand how to use that channel info that comes up in the TIII channel activity box.

I have a 536, 436 and TRX-1 here as well as a couple Airspys I'm trying to use to figure it all out. Should I put each control channel in a separate site in the 536 and then add each of those voice frequences to each site and run the LCN finder? I'm confused.

 

[BigC801]

Ill send you a PM in a few

 

[KC0NXH]

KCP&L

I Also found these same Control channels on my Service Monitor. I believe that KCP&L is running Tait DMR III. Pulled the FRN for KCP&L and they don't list anything in the 152Mhz band. Looks like I'm going to have to program this stuff manually into my DMR scanner. Any suggestions?

 

[KC0NXH]

Ill send you a PM in a few

Do you have a PM that could help me out?

 

[wbloss]

I Also found these same Control channels on my Service Monitor. I believe that KCP&L is running Tait DMR III. Pulled the FRN for KCP&L and they don't list anything in the 152Mhz band. Looks like I'm going to have to program this stuff manually into my DMR scanner. Any suggestions?

Probably part 22 - takes a bit more work but can be pulled directly from FCC
https://wiki.radioreference.com/index.php/Part_22_Paging_Channels

W

 

[kcbw]

KCP&L

I Also found these same Control channels on my Service Monitor. I believe that KCP&L is running Tait DMR III. Pulled the FRN for KCP&L and they don't list anything in the 152Mhz band. Looks like I'm going to have to program this stuff manually into my DMR scanner. Any suggestions?

I could also use some assistance with programming this system. Can someone provide guidance on this?

 

[hkrharry]

YG WQYB911
KANSAS CITY POWER AND LIGHT COMPANY
[APPLICANT IS AN ELECTRICAL POWER UTILITY PROVIDING POWER TO THE PUBLIC. RADIOS ARE USED TO OPERATE AND MAINTAIN THE POWER SYSTEM.]
Control Point 1 - 801 CHARLOTTE STREET, KANSAS CITY MO 816-654-1238
(link)
09/11/2017 License Modified
(transaction log)
1 - MIAMI MW, MIAMI MW, 2.7 MI S, MIAMI (SALINE) MO [Structure: Guyed] (map)
[Antenna 1 - HTT: 62.5m, HAAT: 87.6m]
153.6575 FB8 Ant: 1 100p 150e Units: 1 7K60FXD (DMR) 7K60FXW (DMR)
152.3075 FB8 Ant: 1 100p 150e Units: 1 7K60FXD (DMR) 7K60FXW (DMR)
2 - MIAMI MW MOBILES, 40.0 km radius around fixed location 1
158.16 MO8 Ant: 1 50p 100e Units: 600 7K60FXD (DMR) 7K60FXW (DMR)
3 - MO Land mobile control station meeting 20 rule
158.16 FX1 Ant: 1 50p 100e Units: 5 7K60FXD (DMR) 7K60FXW (DMR)
4 - FAYETTE MW, FAYETTE MW, 3.5 MILES WEST OF, FAYETTE (HOWARD) MO [Structure: Guyed] (map)
[Antenna 1 - HTT: 54.9m, HAAT: 91.4m]
153.59 FB8 Ant: 1 100p 150e Units: 1 7K60FXD (DMR) 7K60FXW (DMR)
153.065 FB8 Ant: 1 100p 150e Units: 1 7K60FXD (DMR) 7K60FXW (DMR)
5 - FAYETTE MW MOBILES, 40.0 km radius around fixed location 4
158.235 MO8 Ant: 1 50p 100e Units: 600 7K60FXD (DMR) 7K60FXW (DMR)
157.47 MO8 Ant: 1 50p 100e Units: 600 7K60FXD (DMR) 7K60FXW (DMR)
6 - MO Land mobile control station meeting 20 rule
158.235 FX1 Ant: 1 50p 100e Units: 5 7K60FXD (DMR) 7K60FXW (DMR)
157.47 FX1 Ant: 1 50p 100e Units: 5 7K60FXD (DMR) 7K60FXW (DMR)


Also, They have a large number of channels on Part 22 EA frequencies

Under this FRN: 0003611720

the EA ones are marked as CP, the regular trunked ones are marked as YG.

All Tier III Tait back bone

HH