Kenwood D710A group scanning

Status
Not open for further replies.

n0evh

Member
Premium Subscriber
Joined
Apr 15, 2010
Messages
3
Location
Independence, Missouri
I have about 50 VHF freqs in group 0 and about 50 UHF freqs in group 1. Is there a way I can let the left side and right side of the radio display scan only one of those groups?

Have looked in the manual but you know how that can be? Geeze I am getting old!

John N0EVH
 

AK9R

Lead Wiki Manager
Super Moderator
Joined
Jul 18, 2004
Messages
6,484
Location
Central Indiana
Try using the group scan. Select a memory channel in the group you want to scan, then press and hold the tuning knob until it starts scanning. It will just scan the memories in that group. Then switch to the other side of the radio and repeat the process.

Sent from my DROID RAZR using Tapatalk
 

n0evh

Member
Premium Subscriber
Joined
Apr 15, 2010
Messages
3
Location
Independence, Missouri
W9RXR, thanks. See what I was doing wrong. After selecting the group for left and right display, I was holding the MR button to start rather than the TUNE button. Appreciate you getting me past my error!

N0EVH John
 
Status
Not open for further replies.
Top