• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood Fleetsync

Status
Not open for further replies.

psloanjr

Newbie
Joined
Dec 26, 2013
Messages
1
I have NX-300 portables and a NXR-810 repeater that are using the Fleetsync PTT ID. When I add a new radio name with the Fleet ID and Radio ID do you have to update every radio or just the repeater? We have a lot of radio's and would hate to update all of them. There is a Fleetsync port on the back of the repeater and looks like a phone jack. Let me know. Thanks,
 

ramal121

Member
Joined
Dec 5, 2008
Messages
1,654
Location
Sonoma, CA
If you add a new ID to the mix of fleetsync radios, you'll have to update the alias table in every radio for the name to show on the display. Otherwise all that will come up is the ID number. You'll have to touch every radio.

The port on the back of the NX-810 is for networking, has nothing to do with fleetsync.

My question is why you aren't using nexedge? Digital has over the air aliasing and removes the headache you're facing all together.

Sent from my SCH-I535 using Tapatalk 2
 
Status
Not open for further replies.
Top