• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood KAS-20 AVL and P25

Z

zstewart

Newbie
Premium Subscriber
Joined
Nov 4, 2014
Messages
1
Location
Murray, Kentucky
Hello,

Was curious if anyone out there knew if Kenwood KAS-20 could be utilized on a IP connected P25 conventional radio system. I know all of the brochures market that it'll work with DMR and Nexedge systems, but I didn't know if the repeater itself needed to be Kenwood (DMR or Nexedge) equipment or not. My system is made up of 3 Simoco P25 repeaters linked via microwave. From what research I've done, and since Kenwood does not directly make a P25 repeater, KAS-20 would not work on this type system.

If someone can confirm this info, I would greatly appreciate it!

Thanks,
Zach
 
mmckenna

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,872
Location
Roaming the Intermountain West
The Function Reference manual I have (for version 1.22) only shows the following supported systems for IP:
NXDN Trunking Type-C 2nd generation using KPG-1002GW IP Gateway Software
NXDN Trunking Type-C 1st generation Using NXR-5x00/NXR-x00 Repeater
NXDN Conventional using NXR-x10 Repeater + KTI-3, NXR-5x00/NXR-x00 Repeater
DMR Conventional using TKR-Dx10 Repeater + KTI-5

P25 is not mentioned anywhere in the manual.
 
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,625
Location
Florida
STARGATE is the console that EFJ deploys. Any CSSI compliant console can work over ISSI/CSSI
 

Attachments

  • 7000+Product+Sheet.pdf
    341.4 KB · Views: 18
You must log in or register to reply here.

Similar threads

S
WS1065 programming North Carolina
Replies
12
Views
1K
OnYourSix
O
W
Questions and Concerns on P25 and Simulcast - New SDS-200 Owner
2
Replies
22
Views
3K
wolverine871
W
C
Which VHF/UHF mobile (analog) has great Cross-Band Repeat? (w/ minimal time between RX and TX open and good selectivity)
Replies
14
Views
2K
kk9h
kk9h
Twister_2
Hollywood Casino Grantville (and potentially York & Morgantown)
Replies
11
Views
1K
Twister_2
Twister_2
B
TK-2180 - Working channels?
Replies
1
Views
649
mmckenna
mmckenna
Top