• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood TK-360G wont read or write

Status
Not open for further replies.

zsauve

Member
Premium Subscriber
Joined
Jun 24, 2010
Messages
159
Location
Oak Creek, WI
I acquired a kenwood tk-360G off of ebay and when i power the radio on i get an orange LED, no power up tone or anything and when i press one of the side buttons, the LED will alternate between red and green. Does anyone know what could be causing this issue? I cant even get the KPG-56D to recognize the radio
 

ffemt6488

Member
Joined
Feb 24, 2014
Messages
44
Location
troy mo
when you try to read or write the radio hold the radio in one hand and with light pressure hold the programing cable tight to the radio i had a simalar issue withe a TK-270g
 
Status
Not open for further replies.
Top