• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood TK-380 UHF Questions

Status
Not open for further replies.

gman4661

Member
Joined
Sep 10, 2009
Messages
235
I'm interested in getting a TK-380 UHF for GMRS and scanning. Anybody know what the channel capacity is? Can this radio be used for FRS as well? I'm also interested in knowing your opinion of this model radio. Thanks!

PS - Anybody willing to sell me one at a good price?
 

N5AFD

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
15
Location
DFW, TX
I believe they are 256 channel in conventional mode. If you are going for the lower split version, it will go from approx 440-482ish. My city used to simulcast FD dispatch on 482.xxxx and it worked great along with the ham stuff. As far as FRS, not sure of the legalities since they are very lower power and the TK has the option of high power. I'll let someone else touch on that.
Also, at least on the old DOS software I use, you are not limited to any number of channels per zone. It has a continuous knob so it's very flexible on the programming side. It's been a work horse. Very sturdy and heavy. Great receive and transmit audio. Hope this helps in your decision.
 

Thayne

Member
Joined
May 1, 2002
Messages
2,145
They do 250 channels\groups, all CTCSS and DCS tones, they of course could be used on FRS\GMRS but are not legal to be used for that. They are very good radios, but are not being sold new by Kenwood for about the last 3 years. They were replaced by the TK-3180 which is 512 channel capable with more fatures & a little bit smaller.
 

Thayne

Member
Joined
May 1, 2002
Messages
2,145
One thing is that FRS radios cannot have removable antennas & are intrinsically power limited; you could use it on GMRS but you should read up on all the regs on a Wiki because I am pretty sure GMRS has some limitations of what can be done on some of the Freqs.---
 
Status
Not open for further replies.
Top