• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood TK-5710 Missing P25 Transmissions on SCAN

Status
Not open for further replies.

n9upc

Member
Joined
Jan 18, 2003
Messages
234
Location
Land of mixed mode digital comms
Have a Kenwood TK-5710 that is being used on a P25 Simulcast Coventional System. The radio Transmits and Recieves (not on SCAN) with no issue. However, when scanning it seems like a Late Entry Fast Unmute is not working.

I say this cause I can have another radio next to the 5710, scanning the same channels, but the 5710 will miss the transmission. Weird part is that it will still stop on the channel and show the P25 ID but no audio.

Now sitting on the channel for Prioeiry scan works with no issues. Also as stated not scanning it picks it up just fine. Any ideas?
 

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,002
Location
Florida
1, what version is the radio?
2, what firmware version do you currently have in it?
 
Status
Not open for further replies.
Top