• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

kenwood tk-705d

Status
Not open for further replies.

lenny72

Member
Joined
Dec 8, 2009
Messages
3
does anybody know how to program the kenwood tk-705d.it was my father inlaws and i dont have the instrustions and cant ask him because he is past away
 

lenny72

Member
Joined
Dec 8, 2009
Messages
3
i used your link but it tell me nothing about programming.how do i program the kenwood tk-705d through the front panel. all i have is the radio and mic and power cord
 

Mike-KC8OWL

Member
Joined
Dec 25, 2003
Messages
242
Location
Henderson, NV
Here is what you need to do - all the information you need is there.

1) Join the Yahoo group (all you need is a Yahoo e-mail address)
2) Once you have access to the group, go to the Files section and there is a folder called "Front Panel Programming"
3) Everything you need in terms of directions is there - I have successfully used these directions several times on my 805D
 
Status
Not open for further replies.
Top