• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood TK-981

Status
Not open for further replies.

john56

Member
Joined
Dec 19, 2002
Messages
159
Location
Toledo, Ohio
I have the programming CD for the 981, and I am having trouble trying to program the FCC Channel number. I have seen some info on the internet, but putting in a
2 digit number just changes the last four on the frequency. How do I change the first numbers of the frequency say from 935.00 to 927.00?
Is there a website that may exist to help me?

Thanks,

John KD8BIN
 

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,608
Location
Florida
stock without mods, wont do it, check the 902mhz.com (i think thats the site) for info on how to.
 
Status
Not open for further replies.
Top