• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood TK762G Firmware

P

Petrus112

Newbie
Joined
Apr 20, 2023
Messages
3
Location
Ludwigshafen am Rhein
Hello, I have a Kenwood TK762G VHF that I have recorded with a wrong Kenwood firmware , the device turns on, even the flash mode ( channel button and turn on) still goes, where and who can help me, I would be very grateful for help
My english is very bad and was translated with a program.
best regards Peter
 
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,625
Location
Florida
Edit

I located the firmware for your radio.
I will contact you by PM for you to obtain.
 
Last edited:
P

Petrus112

Newbie
Joined
Apr 20, 2023
Messages
3
Location
Ludwigshafen am Rhein
Hello, thanks for your effort, I can not download the file, but probably this file you want to send is exactly the one that crashed my device, I found it in another forum.
This firmware is not for the 762G
 
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,625
Location
Florida
Can you show a photo of the radio where it is crashed?
How are you updating the firmware? Are you using Fpro to upload the firmware?

1682515603230.png
1682515630217.png
 
P

Petrus112

Newbie
Joined
Apr 20, 2023
Messages
3
Location
Ludwigshafen am Rhein
hello, this procedure is known to me, I had followed it, the device shows after the wrong hex.file in the display simply only a dash, in the flash mode you come back without problems, also other hex.files are accepted.

best regards
 
You must log in or register to reply here.

Similar threads

kb1ejw
NX-5800 mic question
Replies
2
Views
172
kb1ejw
kb1ejw
N
Midland BR180 & Kenwood ProTalkXLS/PKT-23
Replies
0
Views
190
NorthernRedwood
N
J
Kenwood 5700 Firmware Loading Question
Replies
3
Views
312
JimOnFire
J
D
Baofeng DM1701 No audio in DMR, No support from BOAFENG
Replies
1
Views
180
kb1fua
kb1fua
S
HYT TM-610 Programming
Replies
3
Views
335
speedway_navigator
S
Top