• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

KPG-49D Help

Status
Not open for further replies.

charrison3247

Member
Joined
Nov 12, 2009
Messages
7
Location
Texas
Hello All,

Forgive me if my question is simplistic, Im not very experienced on the progamming side of things.

I am trying to reprogram my TK-780 with KPG-49D.

I have my freq info that I need to reprogram, where I become confused is with the PL tones.

Where do I enter the PL tone in the software? there is a place to place encode/ decode tones (QT/DQT) is that where it goes? which one do I put it under?

Im just cofused. Can someone help?
 

brandon

Member
Database Admin
Joined
Dec 19, 2002
Messages
3,511
Location
SoCal
QT/DQT Dec for your decode tone (for receive)
QT/DQT Enc for your encode tone (to transmit)
 

slacha

Newbie
Joined
Dec 17, 2011
Messages
1
I'm in the same situtation. Have a PL of 734. In programming my TK-280, my choices are D734N or D734I under QT and DQT. Which one is which, do both QT and DQT need a number? I programmed both with D734N and can only recieve, not transmit. Any suggestions would be greatly appreciated.
 
Status
Not open for further replies.
Top