• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Laptop Mounts

Status
Not open for further replies.

MetalCarnage

Member
Joined
May 12, 2005
Messages
735
Location
Ajax Ontario
Hello all, just curious if anyone knows of any GTA or surrounding area business's that sell Auto Laptop Mounts...

i am looking for something similar to this
http://www.autolaptoplinkinc.com/
but hoping there is a canadian equivalent somewhere around toronto.

This company had cheaper stuff then the overpriced Jotto Desks that i saw. I am basically looking for a universal mount which i can put on multiple vehicles for under $150...

Any help is appreciated
 

hoser147

Member
Joined
Dec 17, 2005
Messages
4,439
Location
Grand Lake St. Marys Ohio
Metal, My cousin just buit one from materials bought at the local hardware, Flex conduit and all he had about 30 bucks in it and it came out sweet, he is on the road doing real estate appriasials and was wanting somethng to do the job without having a fortune in the mount. good scannnin hoser147
 

MetalCarnage

Member
Joined
May 12, 2005
Messages
735
Location
Ajax Ontario
hoser147 said:
Metal, My cousin just buit one from materials bought at the local hardware, Flex conduit and all he had about 30 bucks in it and it came out sweet, he is on the road doing real estate appriasials and was wanting somethng to do the job without having a fortune in the mount. good scannnin hoser147
Anyway u think you could get me a reference pic of some sort so i can get ideas about maybe building my own?
 

W4USP

Member
Joined
May 25, 2006
Messages
9

hoser147

Member
Joined
Dec 17, 2005
Messages
4,439
Location
Grand Lake St. Marys Ohio
Metal I will give him a call and see if I can get you pics, he does real estate appraisals so it might take a day or 2 before I hear anything from him...........hoser147
 

W4USP

Member
Joined
May 25, 2006
Messages
9
I made a plywood platform that would fit on the floor of the passenger seat, weighted it down with a sandbag. I can take it out and put my laptop mount on the other plywood platform I made for my truck using the quick disconnect fixture I linked to above. I tried using one platform for both, but I needed a larger one for the truck since it rides a lot rougher. This system works well for me.
 
Status
Not open for further replies.
Top