Haven't heard them in awhile is Earlville still paging on 154.19 or did they move to another frequency?
Lasalle county Earlville question
- Thread starter nick223
- Start date
- Status
Didn't they move to 151.460 with everyone else? They've also got the remote link listed in the database but I've never heard anything on it when I've been out there.
Earlville is/was dispatched by Mendota. I wonder if they moved there?
Allen Township (Ransom), Grand Ridge, Leonore, Tonica, Cedar Point, Standard, Serena and Sheridan are the ones on the 151.4600 system. Everyone else is spread around on their own frequencies, dispatched by Ottawa, ValComm or Mendota heh
Just was told they changed awhile back 159.345. Looking at their FCC license they have a few..
ULS License - Public Safety Pool, Conventional License - WQBC936 - EARLVILLE FIRE PROTECTION DISTRICT - Frequencies Summary
ULS License - Public Safety Pool, Conventional License - WQBC936 - EARLVILLE FIRE PROTECTION DISTRICT - Frequencies Summary
Let me know if you start hearing them Mikey on that freq.
That's correct on Marseilles and the occasional Leonore page on 154.190
is Earlville using 151.3325 ??...
Not totally sure then have a few on their FCC license. I was told the frequency above but they weren't very sure.
151.3325 is earlville. Just heard them go out
151.3325 is Earlville FD but beware you will pick up Bureau County Sheriff's Department frequency 151.3250 on The Earlville freq since they are so close together.
Bureau Co has a 127.3 PL who I can hear some days especially when the band is open, have you heard a PL on Earlville FD ?....
Just heard the female dispatcher on Earlville 151.3325 do a field signal test and using PL79.7...Great signal here in Joliet....
Was it actually Earlville or bucom sheriff?
She mentioned Earlville....
151.3325 is also used by Park Forest-Richton Park just east of me so I turned off there DPL and monitored it till she came on for the test...only receive Bureau on 151.325 when conditions are good...If you can hear Earlville and have PL let me know.....
What program were you using? I was logging with proscan and no pl tone came up.
I'll add it this way now and let you know.
I'll add it this way now and let you know.
I dont use a pgm, just my 996XT scanner with the PL search and when the freqy became active the PL showed up....I use a Scanner Master 5094A with 60' of LMR400....
- Status
Similar threads
