LDS System Site-03 Farnsworth Pk

Status
Not open for further replies.

gldavis

KE7MQF
Premium Subscriber
Joined
Oct 17, 2002
Messages
1,405
Location
Bountiful, UT
Unitrunker is decoding the control channel (858.8125) as a P25 phase 2 system. I am seeing both slots being used, but not hearing much on both a SDS100 and TRX-2. the TRX-2 is catching more than the SDS100. I have checked, and the SDS100 is set for a phase-2 system.
Suggestions?
 

gldavis

KE7MQF
Premium Subscriber
Joined
Oct 17, 2002
Messages
1,405
Location
Bountiful, UT
Problem with monitoring this system is that with all of "THE VIRUS" issues, there is not much traffic on the system. Most of the users have been shut down for the duration. I have seen/heard Security and (what I call) Dock Operations, the loading and unloading of supplies at Welfare Square. Those guys and gals are doing wonderful work.
 

522

Active Member
Premium Subscriber
Joined
Dec 8, 2007
Messages
520
Location
Murray, Utah
You are right with not much traffic. Had that run from 11:00 am until 3:00 pm today. Only Security and even they were encrypted most of the time.
 

gldavis

KE7MQF
Premium Subscriber
Joined
Oct 17, 2002
Messages
1,405
Location
Bountiful, UT
About the only "unencrypted" is when another user wants access to an area that has alarms.
Try again tomorrow. Welfare Square (the docks) may be open and operating.
 

522

Active Member
Premium Subscriber
Joined
Dec 8, 2007
Messages
520
Location
Murray, Utah
My apologies.... forgot to respond. I recorded this for a good chunk of the day last week.
Still not much going on except:

Security (some encrypted, some not)
Distribution Center Logistics
Property Management/Maintenance

Very short and uneventful calls.

I'll check Unitrunker tomorrow.
 

gldavis

KE7MQF
Premium Subscriber
Joined
Oct 17, 2002
Messages
1,405
Location
Bountiful, UT
This system has been rather boring for the past year.
Site-03 is the only one I can reliably receive at my location.
 

enosjones

Member
Premium Subscriber
Joined
Feb 22, 2006
Messages
1,893
Location
Price, Utah
I seem to remember it being a phase 1 system cuz my hp-1 picked it up and followed it fine, the data base also says phase 1
 

gldavis

KE7MQF
Premium Subscriber
Joined
Oct 17, 2002
Messages
1,405
Location
Bountiful, UT
UPDATE:
Looking at what Unitrunker has "captured" over the past couple of weeks,,,,,,,, and I am confused. It looks like there are 10 channels being used (+ 1control channel). But each channel has 3 dfferent LCN's. (Site 03)
Example = 854.9375 has LCN 00-0310, 08-0620, and 08-0621.
It is P25 and all comms are digital ID is 92085-00A.
I knew that P25 can have 2 slots, but I did not know there could be a third.
 
Status
Not open for further replies.
Top