• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

LED status operation on G4 / G5

Status
Not open for further replies.
C

cpro48609

Member
Premium Subscriber
Joined
Mar 14, 2017
Messages
36
Does anyone know if the LED can be programmed to light up a certain color for certain talkgroups? If so, where is this done in the software as I could not find it.

If it does not do this then has it been brought up as a feature request? Aside from the terrible decode of P25 the one thing I will miss about my TRX-1 is I had it set so dark blue LED would come on for county PD traffic, light blue for city PD, red for Fire and yellow for EMS. This was very handy to tell at a glance who was talking.

I thought I saw on an advertisement that the G4 / 5 had an LED feature (maybe in the antenna?) but could not find a way to activate it for different talkgroups anywhere in the software.

Thanks,
Terry
 
C

cpro48609

Member
Premium Subscriber
Joined
Mar 14, 2017
Messages
36
Found out from Unication it cannot.


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.
Top