Listening to DMR Amateur Radio on Uniden 436

[KI5IRE]

I was wondering how I can setup a DMR amateur radio system (CBridge 2.0 / Brandmeister etc.) to scan on a Uniden 436? I've tried it before, but was not successful. Is it single frequency or what kind of system do I need to set it up as in Sentinel?

Thank you

 

[laurennntaps]

im wondering the same!!!!

 

[jonwienke]

One frequency trunked system type.

Separate site for each transmitter location with whatever frequencies are transmitted from that location.

You can put talkgroups under departments as needed. Probably best to have a department each for worldwide, nationwide, and local talkgroups.

You can program names and callsigns for unit IDs, but there isn't enough room to program everyone in the world. If you put the system in its own favorite list you'll have more room.

 

[KI5IRE]

One frequency trunked system type.

Separate site for each transmitter location with whatever frequencies are transmitted from that location.

You can put talkgroups under departments as needed. Probably best to have a department each for worldwide, nationwide, and local talkgroups.

You can program names and callsigns for unit IDs, but there isn't enough room to program everyone in the world. If you put the system in its own favorite list you'll have more room.

On several databases Ive seen TGID (PTT#), the PTT number in parenthesis is just the time before the talkgroup times out after inactivity on a talkgroup that is not full time and I dont need to put this in, correct?

 

[jonwienke]

You can assign any name you like to a talkgroup.