I am trying to unlock a channel on my PRO-94. at the bottom of the display L/O is shown. I try following the directions in the manual. It says to press the lockout botton and then the channel will become unlocked. This isnt working, the channel I would like to use is still locked out, any ideas??
lock out function
- Thread starter acab6
- Start date
- Status
Howdy acab6,
I found this in my Pro-95 manual, perhaps yours is similar:
CLEARING TALK GROUP IDS
1. Press PGM then TRUNK.
2. Press FUNC, UP or DOWN to select ID memory.
3. Press FUNC then CL.
CLEARING ALL TALK GROUP IDS IN ONE BANK
1. Press PGM.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, UP or DOWN.
4. Press FUNC then 6. Confirm list clear? 1=YES Press other key for NO. appears.
5. Press 1 to clear all talk group IDs within a bank. List cleared appears.
To cancel the deletion, press any key except 1. The scanner returns to the talk group ID memory mode.
Hope that helps.
I found this in my Pro-95 manual, perhaps yours is similar:
CLEARING TALK GROUP IDS
1. Press PGM then TRUNK.
2. Press FUNC, UP or DOWN to select ID memory.
3. Press FUNC then CL.
CLEARING ALL TALK GROUP IDS IN ONE BANK
1. Press PGM.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, UP or DOWN.
4. Press FUNC then 6. Confirm list clear? 1=YES Press other key for NO. appears.
5. Press 1 to clear all talk group IDs within a bank. List cleared appears.
To cancel the deletion, press any key except 1. The scanner returns to the talk group ID memory mode.
Hope that helps.
JESSERABBIT
Member
In addition to above post, can you delete the frequency, then re-enter. If so would the channel still be locked out. I don't know if it would work, maybe worth a try?
Al42
Member
Entering 0 as the frequency should do it.
- Status
Similar threads
BCD325P2/BCD996P2:
BCD996P2 questions (new owner)
