Tribunicus
Member
Hi everyone,
i managed to swap a 16 pin logic board from an old VHF Radius m216 and coupled it with a UHF 449-470 RF board in an M100 Chassis along with the new multi channel head, eliminating the masked Logic board that was present. i blanked the new logic board successfully with Lab rss, i went through the initialization procedure successfully plugging in all the tuning values i could read from the old logic board, as well as the voltage which i read with a multimeter, and the 8 digit crystal number. my question is about the tuning label. mine has what appears to be 8 digits. im not sure if it was just sloppy writing or what. it looks pretty clearly like 72623130. the 1 appears to have an = through the middle of it. could the 7 be some kind of letter? the more i look at it i believe i entered this incorrectly. i thought that the person nay have been trying to cross out the 1 or something. the radio powers up receives an frequencies ok, but i cant check TX just yet. I will try to take a picture of the label so i can get everyone's opinion. the crystal number is 4214 1696. any opinions from people who have seen these labels would be great. this is my first time doing this. if i did it wrong i would like to re blank the board and re initialize and enter the proper tuning number
Thanks in advance
i managed to swap a 16 pin logic board from an old VHF Radius m216 and coupled it with a UHF 449-470 RF board in an M100 Chassis along with the new multi channel head, eliminating the masked Logic board that was present. i blanked the new logic board successfully with Lab rss, i went through the initialization procedure successfully plugging in all the tuning values i could read from the old logic board, as well as the voltage which i read with a multimeter, and the 8 digit crystal number. my question is about the tuning label. mine has what appears to be 8 digits. im not sure if it was just sloppy writing or what. it looks pretty clearly like 72623130. the 1 appears to have an = through the middle of it. could the 7 be some kind of letter? the more i look at it i believe i entered this incorrectly. i thought that the person nay have been trying to cross out the 1 or something. the radio powers up receives an frequencies ok, but i cant check TX just yet. I will try to take a picture of the label so i can get everyone's opinion. the crystal number is 4214 1696. any opinions from people who have seen these labels would be great. this is my first time doing this. if i did it wrong i would like to re blank the board and re initialize and enter the proper tuning number
Thanks in advance