• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Loss of 467 on GMRS

Status
Not open for further replies.

VE3WTV

Member
Joined
Jan 18, 2014
Messages
34
Location
Ontario, Canada
It can't be any more clear. The GMRS repeater input frequencies had been reserved for the possibility that IC would allow for repeater use on GMRS. That is not going to happen, so they have removed them from the FRS/GMRS in Canada.

The other 467 mhz channels(8 to 14) in FRS are still there, as stated in Table 1.

If you look at my #14 post, above, you will see only 462 frequencies. I don't see 467 included in FRS/GMRS at all. Why does it look like IC is contradicting themselves? I don't think they have done a good job of clarifying this.
 

chief21

Member
Premium Subscriber
Joined
Mar 2, 2004
Messages
1,799
Location
Summer - Western NC; Winter - Tampa Bay FL
If you look at my #14 post, above, you will see only 462 frequencies. I don't see 467 included in FRS/GMRS at all.

@VE3WTV The FRS and GMRS services are separate. The chart in your post (Table 2) is for GMRS frequencies, all of which are 462 MHz and some of which are shared (*) with FRS. Earlier in the document, you can find Table 1, which has two columns of FRS frequencies. The 462 frequencies are listed in the left column and the 467 frequencies are listed in the right column. The 467 frequencies are FRS-only and are not shared with GMRS.
 

PriorMike

Member
Joined
May 26, 2016
Messages
329
Location
Arnprior, Ontario, Canada
If you look at my #14 post, above, you will see only 462 frequencies. I don't see 467 included in FRS/GMRS at all. Why does it look like IC is contradicting themselves? I don't think they have done a good job of clarifying this.


Click that link.
 
Last edited:

bill4long

Member
Joined
Aug 6, 2012
Messages
1,463
Location
Indianapolis
Just a "Gut" feeling... The main manufacturer (Midland) of consumer grade GMRS equipment seems overly committed to Simplex users...

Their newest and most expensive radio, the MXT400, has repeater access capability.
 

W8UU

Pilot of the Airwaves
Premium Subscriber
Joined
Nov 22, 2007
Messages
307
Location
Wellston Ohio USA
Just a "Gut" feeling... The main manufacturer (Midland) of consumer grade GMRS equipment seems overly committed to Simplex users...


My guess is the average GMRS user only wants point to point communication (higher powered walkie-talkies intercommunicating on a camping trip, or mobile to base comms between the home and car) and doesn't have a local repeater available to use or the financial and technical wherewithal to build their own repeater station.
 

VE3WTV

Member
Joined
Jan 18, 2014
Messages
34
Location
Ontario, Canada
I couldn't care less about repeaters. Even as an amateur radio operator, I've been on the GM (WW8GM - Detroit) repeater many times, and it's not my thing. I've talked to guys up in Gaylord from my living room in the middle of Essex County, but I'm more interested in talking to a guy a few miles away handheld to handheld. I would only be interested in talking through a repeater if I wanted to talk to someone far away about what's going on where I'm at, or if I was able to help someone who's out of range.
 

bill4long

Member
Joined
Aug 6, 2012
Messages
1,463
Location
Indianapolis
My guess is the average GMRS user only wants point to point communication (higher powered walkie-talkies intercommunicating on a camping trip, or mobile to base comms between the home and car) and doesn't have a local repeater available to use or the financial and technical wherewithal to build their own repeater station.

My guess is the average GMRS user uses Part 90 equipment and doesn't give a crap about the legality of it.
 
Status
Not open for further replies.
Top