Luzerne County Fire/PD/EMS Repeater INPUT Freq's

[MarkGC1955]

Greetings To All !

I was hoping someone here may be able to direct me to any website that lists not only the OUTPUT frequencies and associated PL tones but also their associated repeater INPUT frequencies.

Any help/information along these lines would be most appreciated !

I can be reached via e-mail directly at: fixxyourpc@gmail.com

Thank you in advance for any assistance you may be able to provide !

Best regards, Mark, Amateur Radio Station WN3SIX
Nanticoke, PA 18634

 

[mikewazowski]

Thread moved to Pennsylvania forum since this is a regional question and not a problem with the database.

 

[DickH]

Greetings To All !

I was hoping someone here may be able to direct me to any website that lists not only the OUTPUT frequencies and associated PL tones but also their associated repeater INPUT frequencies.

Any help/information along these lines would be most appreciated !

I can be reached via e-mail directly at: fixxyourpc@gmail.com

Thank you in advance for any assistance you may be able to provide !

Best regards, Mark, Amateur Radio Station WN3SIX
Nanticoke, PA 18634

In the database, click on a callsign. When the page opens look in the CLASS column. Any freq with MO there is a mobile freq., probably repeater input.
Luzerne County, Pennsylvania (PA) Scanner Frequencies and Radio Frequency Reference

 

[HM1529]

On the county database page, right below the map, there is an option to have inputs shown or hidden.

http://www.radioreference.com/apps/db/?ctid=2280

If you choose "Shown", then you will see whatever inputs have been submitted to the database. If that does not give you what you want, then you need to look at the FCC license data, as suggested above.

 

[W8RMH]

At the top of the database page there is a "Input Frequencies:" box , select "Shown" from the drop down menu and the input frequencies will be shown.

 

[n3obl]

We dont publish the input PL tones. Some systems use different PL on the input freq to enable the repeater. If you are trying to program a radio on their system to transmit I would advise to contact the offical in charge of their system. They can point you to their radio service.