Can anybody tell me if Lyon County/Emporia Law Enforcement, Fire and EMS have moved to KSICS?
I talked to some folks about this today. They are slowly migrating folks over to it. With the ongoing emergencies I am sure the time line has changed a little though.That answers my question. Thanks to each for taking the time to reply to my inquiry.
I don't even see that freq listed on the KSICS page. after looking at the FCC info that freq you listed is a relay freq. But it seems like I don't hear as much chatter as one would expect so i dont' know why. I am using a PSR500 and sometimes it lands on a local talkgroup in LYCO and yet i don't hear any audio and then when it comes in at the last second i miss most of the transmission. So frustrating. the digital trunk isn't as reliable to me at least with this scanner, as the analog radios they had.They seem to have this up and running for the most part. The listed control channel seems incorrect, I'm listening currently on 855.4625 using an RTL-SDR and Raspberry Pi 3 B+. The control channel I listed will provide the voice channels for EPD, LCSO, L-CAT, KTA at I335 & I35, and I believe the road maintenance crews. I'm working on getting my setup streaming on Broadcastify, so we'll see what happens.
Because nobody has submitted the data for the 4 new sites.I don't even see that freq listed on the KSICS page.
so we might need some of these new freqs to hear most the communications? I don't hear as much chatter as one would expect so i wonder if that's why? Would most the local chatter be on those new sites? I have all the nearby control channels for KDOT towers btw. i get about 3 towers coming in.Because nobody has submitted the data for the 4 new sites.
I did a freq search and found another control channel. must be either the tower by Olpe or Northern Heights because it's not as strong a signal. Its' 857.437500. I'm using a PSR-500 and a Scantenna antenna about 25ft in the air. dang I'm glad my antenna held up all these years after reading the other day that it's discontinued!!!They seem to have this up and running for the most part. The listed control channel seems incorrect, I'm listening currently on 855.4625 using an RTL-SDR and Raspberry Pi 3 B+. The control channel I listed will provide the voice channels for EPD, LCSO, L-CAT, KTA at I335 & I35, and I believe the road maintenance crews. I'm working on getting my setup streaming on Broadcastify, so we'll see what happens.