• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

M/A Com 700P

Status
Not open for further replies.

SKYNET156

Duplicate account of Tom Sherman
Banned
Joined
Mar 14, 2009
Messages
0
Location
Orange County, CA
I have been looking for an 800mhz Antenna for a M/A Com 700P Radio and i am unable to find one, can i use any 800mhz stubby antenna for this radio or does it have to be M/A Com?
 

nkarr

Member
Premium Subscriber
Joined
May 8, 2011
Messages
10
You might want to try FMR-Inc, if Newlondon-tech won't work for you. I have done business with Newlondon; they are very friendly and (normally) have a very quick processing time.

I would recommend the 1/2 wavelength 800MHz over the stubs, as I have noticed they seem to perform significantly better in low signal areas. That being said, the stubby antennas are less prone to breaking, especially if worn on a duty belt or placed on car seats.


KRE1011506/1:
https://www.fmr-inc.com/store/index.php?productID=320110592
https://www.newlondontechnology.com/ss/index.php?productID=320106201
 
Status
Not open for further replies.
Top