• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

M40 Speedway

Status
Not open for further replies.

maddogdecker

Member
Joined
Apr 12, 2005
Messages
318
Location
Dekalb County, IN
Does anybody know where I can M40 Speedway Track frequencys? Thanks for all your help. I don't get up into Michigan very much. The best I can tell is M40 Speedway is in Jones Michigan.
 

wogggieee

Member
Joined
Sep 30, 2005
Messages
1,210
Location
Hugo , MN
try searching between 450 and 470 mhz during practice or heats. That's the easiest way then there are fewer cars on the track and you can kind of figure out what freq is who by matching what the spotter is doing by what the cars on the track are. That or ask someone at the track that you see that has a scanner. Odds are you aren't going to find a website for frequencies for most local tracks unless its done by an individual. I've never found lists for tracks i frequent. as far as the track goes, they may have their own license and then you could search the FCC database for that. Those are my thoughts on that, you'll probably have to find them yourself, but that's kind of the fun of scanning.
 
Status
Not open for further replies.
Top