• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

M7100 and P7100 Radios

Status
Not open for further replies.

LowderK

LEO / Paramedic
Premium Subscriber
Joined
Feb 9, 2018
Messages
344
Location
Western Oklahoma
OK I am new to the Harris world .... I was wondering if you have a 7100 series radio and have the encryption feature in the radio for DES or AES 256 does the radio require any hardware in the radio or is it already built in..?
 

nucleaireqc

Member
Joined
Dec 8, 2013
Messages
140
A functionality will have to be added to be able to use encryption and the firmware is required for the use of encryption. No hardware is required all this pass in the DSP

option 14 (DES) Aegis, Provoice and P25
Option 37 AES P25 mode only

DSP requiere
F6R*** DES encryption AEGIS, Provoice and P25 (not sure for AES algo)
F7R*** or F9*** Provoice, P25 conv, P25 Trunking AES and DES
 

n3obl

Ø
Database Admin
Joined
Dec 19, 2002
Messages
1,817
Location
PA
So a radio with F9 can not operate in aegis mode?
 
Status
Not open for further replies.
Top