• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

M7100 control head error

Status
Not open for further replies.

MECS_1947

Member
Joined
Feb 2, 2013
Messages
43
Location
Honolulu, HI
Does anyone know what ERROR 0612 is and how to correct this issue?

It seems to be isolated to the control head, because other control heads seem to work fine with the rest of the set up (MRU, and control cable).

Any info or help greatly appreciated.
 

kb4cvn

Member
Joined
Mar 16, 2004
Messages
877
Location
Nowhere near a paved road, away from the maddening
Error Code 0612 basically means that a control head has "lost" its ID.

Reprogram the attached radio, writing a keypad file to the control head.

Usually the only time I ever saw this was when a remote head is attached to a radio, and that head is programmed as a CU_B which would be used in a DUAL-CONTROL head installation.
 
Last edited:
Status
Not open for further replies.
Top