Madison County and Anderson Indiana ?

Status
Not open for further replies.

wheeled1

Member
Joined
Sep 17, 2006
Messages
4
What are the new police frequencies for this area....the ones listed are not the 800 mhz of their newer system? And also what are the frequencies for the "Storm Spotter" HAM operators for Madison and Marion Counties of Indiana ?
Thanks........
 
Last edited:

bamx2

Member
Joined
Oct 24, 2006
Messages
326
Location
Indiana
I don't think they have them assigned yet. I know for a fact they have taken MDT's out of all APD cars, MCPD are getting MDT's and Anderson has installed the unprogrammed 400 radios in their cars.
 

GTO_04

Member
Premium Subscriber
Joined
Mar 10, 2004
Messages
1,860
Location
Noblesville, IN
A lot of those frequencies are the same ones used on the old system back in the 80s, before they went to 800 MHz.

GTO_04
 

mcema699

Member
Joined
Mar 11, 2005
Messages
258
Yep, 453.050 was ch 1, .700 was 2 and .950 was 3. Fire was VHF at the time. When they went to 800, MDTs were put on UHF.
 

dfoutch

Member
Joined
Dec 12, 2004
Messages
2,556
Location
Anderson, Indiana
Anderson testing new freqs

At about 1:00pm, Anderson started testing new UHF freqs. No PL tones, yet. But may be using Digi Sq, DC numbers are seen on Pro2055.

dean
 

dfoutch

Member
Joined
Dec 12, 2004
Messages
2,556
Location
Anderson, Indiana
North Rx site = Northside Middle School
South Rx Site = ?
Main Rx site =PD
DigiSq =(Please confirm)
453.0500 - 023 CWid(carrier sq)
453.0750 - 031
453.1750 - 047
453.2875 - 065
453.5625 - 072
453.6625 - 074
453.7000 - 116 CWid(carrier sq)
453.9500 - 132
with some voice inversion tested, like in the old days.

dean
 

dfoutch

Member
Joined
Dec 12, 2004
Messages
2,556
Location
Anderson, Indiana
I just have to say one thing: "IF" your radio dos not have DigiSquelch(DCS,DLP) you will get very sick of KSA918. CWid on every freq every few mins.(well seems like it)

dean
 

scanhed

Member
Joined
Sep 14, 2006
Messages
24
Location
Madison County
What are the "DC numbers"? Signal strength? I will have to check my scanners but I do not believe any of them have DigiSquelch. This may be a new issue for me.
 

dfoutch

Member
Joined
Dec 12, 2004
Messages
2,556
Location
Anderson, Indiana
Its like PL tones(CTCSS), but using numbers to control Sqeulch(DCS). With coded sq, you don't have to hear all that CW noise. On the downside, my Pro2055 is a little slow to open sq.

dean
 

dfoutch

Member
Joined
Dec 12, 2004
Messages
2,556
Location
Anderson, Indiana
Kyle: Yes a short test, one in the clear and one inverted. He said yeaterday they might work on connecting the remote receivers to the main site on Main St. If not today then Mon or Tue.

dean
 

khthomas1008

Member
Joined
Oct 5, 2003
Messages
41
Getting close

Wow..they are getting close to launching this new system. Sounds like 453.5625 will be PD main dispatch.
 
Status
Not open for further replies.
Top