Is there one freely available or, does it only comes with purchase?
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Manual?
- Thread starter gcopter1
- Start date
- Status
In my experience, neither one 
Forum + YouTube seems to be the way to find out stuff.
With an email or call to Unication as needed.
If there is a manual, I've never seen it.
Forum + YouTube seems to be the way to find out stuff.
With an email or call to Unication as needed.
If there is a manual, I've never seen it.
W8VI
Member
Here is a 16 page G4 User Manual found on the Scanner Master site. It has a little more information than the 2 page users guide that comes with the G4/G5. Not much detail but a lot of pictures.
http://www.scannermaster.com/v/vspfiles/downloadables/Unication-G4-User-Manual.pdf
http://www.scannermaster.com/v/vspfiles/downloadables/Unication-G4-User-Manual.pdf
W8VI, thanks for the link. Like you said, a little bit more info than the users guide. They make reference to "press K1" but, there's no reference to said key in the illustrations. Thanks.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
W8VI
Member
I believe the K keys are the 4 keys just below the screen with the following markings on each key:.
K1 - Blue triangle
K2 - Red Square
K3 - Orange circle
K4 - White diamond
It took me a while to understand the round multi-function key that is located between the 4 K keys. You use it mostly when your selecting other Zones to monitor and it operates like a Joy Stick.
K1 - Blue triangle
K2 - Red Square
K3 - Orange circle
K4 - White diamond
It took me a while to understand the round multi-function key that is located between the 4 K keys. You use it mostly when your selecting other Zones to monitor and it operates like a Joy Stick.
Last edited:
- Status
