March AFB P-25 System

[bill71]

I have no experience with P-25 vhf systems, so I need some help with the custom table for a Pro-96. This info comes from the Pro96com software.

FileVersion:1
-TowerInfo
#This section is here for information only. With the exception
#of the Call Sign(s), This data is not Read back into the program at all.
System ID : 1c5
System Name :
WACN : bee00
Tower Number (Decimal): 101
Tower Number (Hex) : T0101
Tower Description : (null)
Control Capabilities : Voice,Registration
Call Sign(s) : Unknown

-Tables
#Format: Table ID,Base Freq,Spacing,Input Offset,Assumed/Confirmed,BandWidth
0,851.00625,0.00625,-45.00000,Confirmed,0.00625
1,762.00625,0.00625,30.00000,Confirmed,0.00625
2,136.00000,0.01250,-5.00000,Confirmed,0.01250

-Frequencies
#Format: Channel,Usage,Frequency
2-0a9,a,138.11250
2-0ab,a,138.13750
2-0ad,a,138.16250
2-0b5,c,138.26250

Thanks for the help!

 

[fmon]

Identifier table 2 is used for the system.

In FUNC + 2, set Base to 136.0000, Offset to 8192 and Step to 12.5
In FUNC + 4, set to Table

 

[FireMan16]

what is the offset

 

[fmon]

8192 offset for the Pro-96/2096

 

[FireMan16]

What is the Offset for the Bearcat 396T

 

[fmon]

What is the Offset for the Bearcat 396T

I don't own a 396 but from my understanding, when you set the system to P25 you won't need any additional settings.

 

[WayneH]

I don't own a 396 but from my understanding, when you set the system to P25 you won't need any additional settings.

Correct, you shouldn't need to set anything as it should grab it off the control channel. Since there are a few systems that don't you'll have to make sure you have the latest firmware so you can enter the base and spacing (no offset as said above).

-Wayne