• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

MDC1200 & DTMF Decode

Status
Not open for further replies.

HFR427

Member
Premium Subscriber
Joined
Mar 13, 2010
Messages
11
Location
North Carolina
I've been programming some of the older Vertexes for some time now, but now we're playing with the VX-824. We're trying to set it to decode either DTMF or MDC1200 on the screen. Can anybody tell me what settings should be made to make this happen? I've tried most everything twice with no success!
 

gvodvarka

Member
Joined
Nov 10, 2009
Messages
71
Location
Ontario, Ca.
In the Signaling menu open DTMF and Enable DTMF Monitor. You also need to enable ANI Monitor on the Channel Line. I use this on VX459 radios all the time. ANI cannot be less than 33 ms to decode.
 
Status
Not open for further replies.
Top