Mendocino County - 2020 freqs info

[zerg901]

Mendocino County California

these are items in the 3/2020 cdf freq list that are different than the RRDB

I will write this up as a pseudo update to the RRDB

Anderson Valley Fire - 153.77 R - add PL 110.9

PRC Fire / Pierce Fire - 154.01 - add - PL 167.9

Elk Fire - 154.07 R - add PL 156.7

Legget Fire - 154.13 - add PL 167.9

Fort Bragg Fire - 154.19 - add PL 167.9

CVL Fire / Covello Fire - 154.19 - add PL 136.5

HOP Fire / Hopland Fire - 154.19 - add PL 123.0

GWR Fire / Greenwood Ranch Fire - 154.205 - add PL 156.7

LVF Fire - 154.205 - add PL 167.9

MND Fire / Mendocino Fire - 154.205 - add PL 146.2 - (WQQP473)

POT Fire / Potter Valley Fire - 154.205 - add PL 123.0

add - XME Tac I - 154.445 - PL 0.0 - (Ukiah FD also uses this freq as their repeater input) - thats Tac I as in Idaho

WPV Fire / Westport VFD - 154.25 - add PL 167.9

add - LTL T - 154.37 - PL 123.0 - (this is Willits FD Tac)

add - XME Tac M - 154.325 - PL 0.0 - (Fort Bragg FD also has base and mobiles licensed on this freq)

add - XME Tac N - 154.415 - PL 0.0 - (Fort Bragg FD also on 154.415)

Albion Little River Fire / OR ALR - 154.40 R - add PL 0.0 - 156.24 is input - OST on input

MCSO CMD - 155.91 - add PL 210.7

add - County Parks - Direct - 151.475 - PL 179.9

--------------------

the scheme for labelling the local fire channels is

A - Freq 1 - Dept XXX

A R - Freq 1 as Output - Dept ZZZ

B - Freq 2 - Dept SSS

B R - Freq 2 as Output - Dept TTT

ie

A - 153.89 - Joes FD

A R - 153.89 R - Bills FD

B - 153.95 - Phils FD

B R - 153.95 R - Lou's FD

C - 154.01 - Roger FD - PL 110.9

C - 154.01 - Delta FD - PL 123.0

C - 154.01 - Echo FD - PL 156.7

C R - 154.01 R - Foxtrot FD - PL 167.9

-------------------

One question - are fire units paged on 153.95 or 151.385 - or both ?

 

[zerg901]

let me show some of the local freqs listings

channel load for mobile / portable radios

channel number - channel name - mobile receive - mobile receive PL - mobile transmit - mobile transmit PL - High power or Low power - Narrowband - (OST = operator selectable tone)

18 XME-AR AVY 153.77000 110.9 154.34000 OST H N

19 XME-B UKV 153.89000 123.0 153.89000 123.0 L N

20 XME-BR SCF 153.89000 156.7 154.37000 156.7 H N

21 XME-C PRC 154.01000 167.9 154.01000 XXX.X L N

22 XME-CR UKH 154.01000 210.7 154.44500 XXX.X H N

23 XME-D LTL C 154.07000 123.0 154.07000 XXX.X L N

24 XME-DR EKV 154.07000 156.7 159.00000 OST H N

25 XME-E LEG 154.13000 167.9 154.13000 167.9 L N

26 XME-E RVF 154.13000 123.0 154.13000 123.0 L N

27 XME-F BRG 154.19000 167.9 154.19000 167.9 L N

28 XME-F CVL 154.19000 136.5 154.19000 136.5 L N

29 XME-F HOP 154.19000 123.0 154.19000 123.0 L N

30 XME-G GWR 154.20500 156.7 154.20500 156.7 L N

 

[zerg901]

to finish up this thread

other local fire freqs licensed in Mendocino County

Albion FPD - 46.48

CA - State of - 31.18 R - 31.98 FX1

Comptche FD - 155.8725 R - 159.2475 input - maybe a new repeater

Piercy FD - 46.20 - 46.22

Ukiah Valley Fire District - 154.25 mobiles

Willits, City of - 154.355 - base and mobile

Combining these 3 posts should supply 99% of the local fire channels in Mendocino County

 

[badboys2]

Zerg901

Thanks for all the updated info. In regards to 24 XME-DR EKV, do you know what the EKV stands for? Also, do you know who and what is XME Tac M and Tac N used for?

Thanks,
Paul V.

 

[zerg901]

Per https://gacc.nifc.gov/oncc/predictive/intelligence/situation/sitreport.pdf - EKV is Elk Volunteer Fire Department

I do not know what Tac M and Tac N are used for - but if I had to guess - I would guess they are either used for coordination with Fort Bragg FD - or they are used as extra Tac channels in areas of Mendocino County that are *not* close to Fort Bragg

 

[badboys2]

Zerg901,

Thanks for the response and the link to the info. I didn't know that you responded till just now. I appreciate your help. If I find out what Tac M and N are used for, I'll let you know.

Paul V.