Mercy Medical Center - Canton

[Volfirefighter]

Has anyone been able to monitor, MMC Security? It is listed in the database as 464.5750 DMR Color Code 10 and TG 201. I have it set up in my SDS200 as a DMR One Frequency as suggested by a user in the Uniden Forums and have heard nothing. I am posting here hoping to have some input from someone local as the user that gave me advice is from Dallas, TX.

 

[mtindor]

Maybe they switched to a different color code / LCN, or maybe they have gone ENC. I cannot monitor it from here.

M

 

[Volfirefighter]

I may have found my own answer. I was assuming I could pick MMC up as I pick Aultman up and I am about midway between the two hospitals. However, looking closely at the two licenses, Aultman has a transmit wattage of 40 watts while MMC only has 12 watts.

 

[kf8yk]

I would try 461.375, 461.675 and 463.975. These are licensed to MMC on a newer license (WQYM390) with digital emission designators.

Given the three co-located repeaters, I would suspect trunking like Motorola Cap Plus

 

[Volfirefighter]

I put all 4 frequencies from both licenses in my analog scanner and I have heard "digital noise" on only 454.5750. Still trying to figure out how to program this into the SDS200.

 

[GregOH]

I took my analog scanner to work with me today and got what seemed to be digital noise when tuned to 461.675 on a few occasions.