Metrosafe Question

[kd4bas]

I had settings set up in my PRO 96 when my PC crashed and my backup hard drive also died. After that I had to reset my Win96 profiles for ALL my files (I cried ) But here is my question. I set this table up for the Metrosafe system and was wondering if this is right for the Pro 96 to pick up the Metrosafe system. If this is wrong could someone please advise of the correct settings. I'm stuck with my Pro 96 for a while till I can get my grandson back home, then I can start saving for a Pro 106 of something newer when the money matches. I also added all of the Metrosafe frequencies as well. Settings are listed below:

MOT 3600 CC -> Custom Table
MOT 9600 CC -> Normal

MOT Custom Trunking Table Base Frequency: 851.0625
Offset: 0
Step Size kHz: 12.5

Alpha Tag Frequency RX Mode CT/DC
Metrosafe 01 854.48750 MOT 0.0
Metrosafe 02 856.76250 MOT 0.0
Metrosafe 03 857.76250 MOT 0.0
Metrosafe 04 858.76250 MOT 0.0
Metrosafe 05 859.76250 MOT 0.0
Metrosafe 06 856.43750 MOT 0.0
Metrosafe 07 857.43750 MOT 0.0
Metrosafe 08 858.43750 MOT 0.0
Metrosafe 09 859.43750 MOT 0.0
Metrosafe 10 855.36250 MOT 0.0
Metrosafe 11 856.21250 MOT 0.0
Metrosafe 12 857.21250 MOT 0.0
Metrosafe 13 858.21250 MOT 0.0
Metrosafe 14 859.21250 MOT 0.0
Metrosafe 15 854.73750 MOT 0.0
Metrosafe 16 856.46250 MOT 0.0
Metrosafe 17 856.93750 MOT 0.0
Metrosafe 18 857.46250 MOT 0.0
Metrosafe 19 857.93750 MOT 0.0
Metrosafe 20 858.46250 MOT 0.0
Metrosafe 21 858.93750 MOT 0.0
Metrosafe 22 859.46250 MOT 0.0
Metrosafe 23 859.93750 MOT 0.0
Metrosafe 24 854.21250 MOT 0.0

8CALL90 851.01250 CT 0.0 D
8TAC93 852.51250 CT 0.0 D
8TAC94 853.01250 CT 0.0 D

 

[puzzleriddle]

Win96 - The RadioReference Wiki if system has rebanded you will need win96 & a progrmming cable to load the rebanded /extended tables need to monitor it

 

[scannerfreak]

MetroSafe is a P25 system. Rebanding does not apply.

Since you have WIN96 and are a premium subscriber, just import the system from the DB. No custom tables are needed.

 

[kd4bas]

OK Scannerfreak, thanks for the info. I redownloaded the system through RR & Win 96. So hopefully I can hear them next time I'm in Louisville.

 

[CCEMS703]

I have a pro 2096 and can not figure out how to program the metro safe system. I have never programed a trunking system. I put the 800mhz fre in the bank and put on MO mod but nothing has happend. Any suggestions ?

 

[BigDog-911]

Do you use win500?

 

[CCEMS703]

I don't have any software or cable. I just program using the key panel

 

[BigDog-911]

Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.3.5; en-us; Sprint APA9292KT Build/GRJ90) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)

Type p25 auto
Frequencies: I put all 24 in but u might just put the control freqs in.
Multi-site: I've had good luck picking up more on roam
Then go back and put in your talkgroups or. Wildcard and let the scanning commence.

I would seriously consider purchasing a cable and win500 program. Well worth the investment