Millstone Nuclear Power Station

Status
Not open for further replies.

w1haf

Member
Joined
Dec 17, 2005
Messages
129
Location
Waterford, CT.
There is a major Homeland Security Drill on Tuesday August 5, 2014. It begins at 0800 hrs.

Monitor the Waterford P25 system and the Millstone trunk system to listen in.

The drill will involve Police Fire and EMS.
 

w1haf

Member
Joined
Dec 17, 2005
Messages
129
Location
Waterford, CT.
Waterford Police Department
Millstone Power Plant Drill - NO EMERGENCY, DRILL ONLY

The following is a message from the Dominion Millstone nuclear power facility regarding a rehearsal drill taking place on Tuesday, August 5th, 2014. The Waterford Police and surrounding Police, Fire, and EMS will all be involved in this drill to make our community more prepared in the event of an emergency.

***NO EMERGENCY, DRILL ONLY***

Dear Neighbor,

Millstone Power Station, the Connecticut Department of Emergency Services and Public Protection, Division of Emergency Management and Homeland Security (DEMHS), and the communities surrounding Millstone have developed comprehensive plans for responding to nuclear power plant emergencies. The goal is to ensure that we have procedures in place for protecting the health and the safety of the public. Every two years, our emergency plans are evaluated by the Nuclear Regulatory Commission (NRC) and the Federal Emergency Management Agency (FEMA).

This year, in addition to an evaluation of the plans for responding to an emergency, FEMA and the NRC will be looking at the station’s ability to simultaneously respond to a hostile action security event at Millstone. We will be holding a rehearsal drill on Tuesday, August 5, and an evaluated exercise on Tuesday, September 9.

During both the rehearsal and the exercise, there is likely to be an unusual number of law enforcement, fire, and medical service vehicles coming and going from the site and the towns of Waterford and East Lyme. These two towns will also be stationing officers at designated roadway locations as part of the drill. I wanted to give you a heads-up so that you are not concerned if you see the increased level of activity responding to the Millstone Drill on those days.

If you have any questions about the drill or the exercise, feel free to contact me.

Ken Holt
Manager of Communications - Millstone

***NO EMERGENCY, DRILL ONLY***
 

cg

Member
Premium Subscriber
Joined
Dec 13, 2000
Messages
4,599
Location
Connecticut
DEMHS Region 4, 153.9650 162.2, active as well as several DEMHS talkgroups on the CSP 800 TRS

chris
 

kmacinct

Member
Joined
Jan 6, 2003
Messages
227
Location
Connecticut
That voice on. 965 is amazing to listen to.... Seems to have slowed. . .

1300, everyone standing down...
 
Last edited:

w1haf

Member
Joined
Dec 17, 2005
Messages
129
Location
Waterford, CT.
Yes it was very busy on the millstone trunk system. The used the training talkgroup for the exercise.
 

pro106import

Member
Premium Subscriber
Joined
Dec 13, 2008
Messages
2,858
Location
Milford, Ct. perched high above Long Island Sound
My fault- had the control channel locked out for some reason (859.4625 right now). Working fine now even with the discone. But with the discone I get New Jersey State TRS sometimes- they share some of the same frequencies and talkgroups. With the yagi it is more directional.
Bob
 
Status
Not open for further replies.
Top