Minitor Pager Question

Status
Not open for further replies.
Joined
Feb 15, 2005
Messages
13
I am looking to buy a Minitor II Pager or newer. I have looked on ebay and have trouble finding one for the frequency i need which is 154.1600. and i cant find any on ebay programmed on that. so i was wonder if you know where i can get a used one with programming included. and is my frequency UHF,VHF or lowband? Thanks
 

1268

Member
Premium Subscriber
Joined
Jun 11, 2005
Messages
485
YOUR LOOKING FOR A VHF HIGH BAND PAGER, HOWEVER A MINITOR 2
IS NOT PROGRAMABLE, IT USES A CRYSTAL FOR FREQUENCY AND TONE REEDS FOR YOUR ALERT TONES, YOU CAN BUY A USED ONE AND TAKE IT TO SEVERAL MOTO DEALERS AND HAVE THAT DONE , I HAVE BOUGHT 2 REFURBED MINITOR 2'S FROM G &G COMMUNICATIONS, GREAT WEB SITE , GOOD PRICES OUTSTANDING SERVICE, THERE ARE OTHERS, THATS JUST WHO I'VE DEALT WITH. HOPE THIS HELPS. MARK :lol:
 

Voyager

Member
Joined
Nov 12, 2002
Messages
12,059
meltingplastic8 said:
I am looking to buy a Minitor II Pager or newer. I have looked on ebay and have trouble finding one for the frequency i need which is 154.1600. and i cant find any on ebay programmed on that. so i was wonder if you know where i can get a used one with programming included. and is my frequency UHF,VHF or lowband? Thanks

Also be forewarned that many Min II parts are becoming NLA (No Longer Available).

It may be less expensive to get a Minitor III or IV and have it programmed. As stated above, the Minitor II takes reeds and crystals which can easily cost $50.

Joe M.
 
Joined
Feb 15, 2005
Messages
13
so if i get a minitor 3 then how is it programmed instead of crytals and reeds? and did g &g progrqam it for you or you brought it to the moto dealer
 

1268

Member
Premium Subscriber
Joined
Jun 11, 2005
Messages
485
THE MINITOR 3, 4 AND THE NEW 5 ARE COMPUTER PROGRAMMABLE, YES G&G CAN PROGRAM THEM BUT AS STATED ABOVE THERE ARE MANY DEALERS, I KNOW FALCON WIRELESS SELLS PROGRAMING SOFTWARE, CABLE ETC FOR THESE PAGERS, CHECKED G&G LAST NIGHT SELLING
USED 2"s FOR 159.00 BELIEVE COMPLETELY REFURBED GOING FOR ABOUT 225.OO, IT 'S UPTO YOU WHICH WAY YOU WANT TO .GO. IF YOUR JUST GOING TO USE THIS AROUND THE HOUSE AS A SPARE ETC HE HAS A DEAL ON SOME USED SHINWA CHECKMATES FOR 99.00 SET UP YOUR FREQUENCY AND TONES( NOT AS TOUGH AND SENSITIVE AS A MOTO) MARK :)
 

loumaag

Silent Key - Aug 2014
Joined
Oct 20, 2002
Messages
12,935
Location
Katy, TX
TO: 1268 (Mark),

Welcome to the site, yes as Al42 pointed out, using all caps is considered rude. You might want to review our fearless leader's post titled Etiquette and the Forums, note #3 when you do. :D
 

1268

Member
Premium Subscriber
Joined
Jun 11, 2005
Messages
485
Point taken, IF I offended anyone, sorry. Mark :roll: :cry:
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,531
Location
NJ USA (Republic of NJ)
Just an FYI folks - I am not sure if you can order a Minitor 3 or 4 anymore due to the new 5 finally being available real soon. Also - its probably not worth all that $ to change a freq and tones ( crystal, tone reeds, bench tech labor ) for a Minitor 2 unless he knows someone in the business that wont charge him and arm/leg. Just a thought.......
 

Thayne

Member
Joined
May 1, 2002
Messages
2,145
If you are authorized to be on the system, kenwood has a nice 16 channel vhf portable (TK-2160 I think) that will do 2 tone paging, CTCSS, DCS, scans, and you can talk to the dispatcher too. Of course it won't record like some minitors. Less than $300.00 with charger & Battery.
 
Joined
Feb 15, 2005
Messages
13
Thayne said:
If you are authorized to be on the system, kenwood has a nice 16 channel vhf portable (TK-2160 I think) that will do 2 tone paging, CTCSS, DCS, scans, and you can talk to the dispatcher too. Of course it won't record like some minitors. Less than $300.00 with charger & Battery.

i am authorized to be on the system but, the reason for me getting a pager is to stop carrying around my scanner, as the department does not have any pagers left to give me id figure id just buy one instead of putting wear and tear on my bc246t. thanks for the suggestion though
 

Voyager

Member
Joined
Nov 12, 2002
Messages
12,059
fineshot1 said:
Just an FYI folks - I am not sure if you can order a Minitor 3 or 4 anymore due to the new 5 finally being available real soon. Also - its probably not worth all that $ to change a freq and tones ( crystal, tone reeds, bench tech labor ) for a Minitor 2 unless he knows someone in the business that wont charge him and arm/leg. Just a thought.......

You haven't been able to order new IIIs for quite a while. With the release of the Vs came the inability to order the Min IV new, but there are many used sources for pagers.

Joe M.
 
Joined
Feb 15, 2005
Messages
13
Voyager said:
fineshot1 said:
Just an FYI folks - I am not sure if you can order a Minitor 3 or 4 anymore due to the new 5 finally being available real soon. Also - its probably not worth all that $ to change a freq and tones ( crystal, tone reeds, bench tech labor ) for a Minitor 2 unless he knows someone in the business that wont charge him and arm/leg. Just a thought.......

You haven't been able to order new IIIs for quite a while. With the release of the Vs came the inability to order the Min IV new, but there are many used sources for pagers.

Joe M.

can you list some of more of the sources? thanks
 

Voyager

Member
Joined
Nov 12, 2002
Messages
12,059
meltingplastic8 said:
Voyager said:
fineshot1 said:
Just an FYI folks - I am not sure if you can order a Minitor 3 or 4 anymore due to the new 5 finally being available real soon. Also - its probably not worth all that $ to change a freq and tones ( crystal, tone reeds, bench tech labor ) for a Minitor 2 unless he knows someone in the business that wont charge him and arm/leg. Just a thought.......

You haven't been able to order new IIIs for quite a while. With the release of the Vs came the inability to order the Min IV new, but there are many used sources for pagers.

Joe M.

can you list some of more of the sources? thanks

Best price may likely be eBay. Check with your local dealer, too. G&G was mentioned above.

Joe M.
 

1268

Member
Premium Subscriber
Joined
Jun 11, 2005
Messages
485
I have delt with the following, not to say one is better then the other:
G&G Communications, Falcon wireless, P&W service center, there are many others, put used minitor 2 pagers in your search engine and that will get you started, my advice to you is if this is just temporary until they get some more pagers then get the used Shinwas from G&G, cheaper, will alert on your tones and you can sleep at night without hearing every call in your area! If not you have alot of choices including biting the bullet and buying a new minitor 5. hope this helped you some more. Mark :D
 
Status
Not open for further replies.
Top