This might be a question for the scanner forum but Ive asked it in there and I felt maybe I could get some better answers in the local room, since some of us are listening to the same thing. I am using a radio shack PRO-2096 to monitor KSCIS. It's set up in northeast kansas and has good reception of the atchison, doniphan and nemaha towers. I programmed in the control channel only for all three towers. was missing a ton of reply traffic. so I programmed in just the atchison tower control channel. still missing a ton of reply traffic. Ive got the bank closed and am just scanning about 8 or 9 talkgroup ID's. Ive also tried programming in every frequency on the list listed on this website. was still missing alot of traffic. Does anyone know of any trick I need to use to make this thing quit missing all this traffic. Ive tried changing the delay times on the ID's as well as changing the delay on the actual control channel. I figured if I just monitored one tower it would stop missing traffic but it didnt help either. Ive probably only got 10 conventional chanells programmed into a seperate bank and Ive tried shutting that bank off and scanning only the KSCIS control channel. still misses a ton of traffic. Anybody else having this problem and if so any ideas on a fix?