Mobile Repeater freqs

Status
Not open for further replies.

emd001

Member
Joined
Oct 28, 2007
Messages
322
Location
Conroe, Texas
Hey all,
So i have been doing some reading and there have been some great links coming through the forum lately. Anyway i saw the link to search for towers and antennas within a certain distance of an address so i searched for whats in the air around here. I found some antennas that i had no idea existed (half the fun of hunting right?) Anyway so i was adding these new frequencies into scan lists and decided to lookup the types of frequencies this was listed as. Of course RR has a reference for that (FCC Station Class Codes - The RadioReference Wiki) anyway some of these are listed as "mobile repeater". I am assuming that means that it is a frequency only used when a repeater is needed in the field, is this a correct assumption or am i missing what the mobile repeater means? Anybody else monitor freqs like this? Just wanted to see what everyone else thought.
 

ecps92

Member
Joined
Jul 8, 2002
Messages
15,168
Location
Taxachusetts
Are you asking about MO3's ? or FB2 and FB4's??

MO3's are Mobile Repeaters - Low Power Repeater usually on-board a vehicle for on-scene relay - usually back to another band

FB2 and FB4 are FIXED Location Repeaters [Bldg Tops, Antenna Towers, Mountain Tops]

Hey all,
So i have been doing some reading and there have been some great links coming through the forum lately. Anyway i saw the link to search for towers and antennas within a certain distance of an address so i searched for whats in the air around here. I found some antennas that i had no idea existed (half the fun of hunting right?) Anyway so i was adding these new frequencies into scan lists and decided to lookup the types of frequencies this was listed as. Of course RR has a reference for that (FCC Station Class Codes - The RadioReference Wiki) anyway some of these are listed as "mobile repeater". I am assuming that means that it is a frequency only used when a repeater is needed in the field, is this a correct assumption or am i missing what the mobile repeater means? Anybody else monitor freqs like this? Just wanted to see what everyone else thought.
 

n5ims

Member
Joined
Jul 25, 2004
Messages
3,993
The term "Mobile Repeater" has several uses. It could either be a temporary repeater that is used for special functions, for example to cover a site for a large event like Mayfest or the Texas State Fair (normally the FB2x codes) or used to extend handheld radio range by having a repeater in a patrol car so an officer can communicate with their dispatch when their more powerful mobile radio can connect but their handheld can't quite make the trip (normally the MO3x codes).
 

emd001

Member
Joined
Oct 28, 2007
Messages
322
Location
Conroe, Texas
@ecps92 the freqs i was looking at were listed as FB, FB2 and MO.

@n5ims ah ok, then i might just throw all of these into a scan list and see if any of them are used for the fair this week/end
 

RKG

Member
Joined
May 23, 2005
Messages
1,096
Location
Boston, MA
I don't know if this helps, but classically (and quite informally), the term "mobile repeater" was used to refer to a repeater (usually operating in-cabinet) that was accessed exclusively via RF, that is to say, without any wireline access. The term "base repeater" was used to refer to a station operating so as to repeat mobile inputs but also to transmit directly wireline inputs, such as from a console. As so used, "base repeaters" were often (but not always) a part of voted systems.

I my experience, the terms "mobile repeater" and "portable repeater" are not synonymous.
 

ecps92

Member
Joined
Jul 8, 2002
Messages
15,168
Location
Taxachusetts
FB - Base Station
MO - Mobiles/Portables

FB2 - a Repeater at a Fixed location [Roof, Mtn Top, Tower]

@ecps92 the freqs i was looking at were listed as FB, FB2 and MO.

@n5ims ah ok, then i might just throw all of these into a scan list and see if any of them are used for the fair this week/end
 
Status
Not open for further replies.
Top