Does anyone have the input frequency (transmit freq) for MONOC/CENCOM dispatch frequencies 155.355, 155.265, and 155.175 - (the old CENCOM 1, 2, and 3)
Thank you!
Thank you!
MONOC (CENCOM) Input Freq
- Thread starter ScannerSky
- Start date
- Status
To transmit on, you don't need a TX frequency then? just use receiving?
They are all simplex frequencies which means the transmit and receive frequency are the same.
Thank you much!
cyrusmedic
Member
- Joined
- Oct 4, 2010
- Messages
- 28
- Reaction score
- 0
When CenCom used to dispatch there was a 400 mHz freq that would repeat off the sunrise tower. Cencom used to transmit on it all the time. i had a few co-workers that had personal radios that would also transmit on the 400mHz freq and have it recd and transmitted over 265 (cencom2) from the sunrise tower.
Not sure if it is still in use.
It was my under standing that when then CenCom transmitted on different towers the trans went over the 400mHz freqs to the tower and out over 265 from that tower. each tower had their own 400mHz freq. I am not sure how the transmissions made it back from the tower to cencom.
Not sure if it is still in use.
It was my under standing that when then CenCom transmitted on different towers the trans went over the 400mHz freqs to the tower and out over 265 from that tower. each tower had their own 400mHz freq. I am not sure how the transmissions made it back from the tower to cencom.
- Status
