• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Motorola Alert Monitor M03 Manual

Status
Not open for further replies.

cpg178

Member
Premium Subscriber
Joined
Sep 7, 2014
Messages
413
Recently got my hands on an Alert Monitor, looking to see if anyone on here has the manual for it, was unable to find anything through searching google, and batlabs.
s-l1200.jpg
 

kf8yk

Member
Joined
May 3, 2003
Messages
779
If it helps I have a M04 (UHF) manual. Obviously the RF section will be different but the AF/decoder/power supply circuits should be the same.
 

cpg178

Member
Premium Subscriber
Joined
Sep 7, 2014
Messages
413
If it helps I have a M04 (UHF) manual. Obviously the RF section will be different but the AF/decoder/power supply circuits should be the same.
That would be very helpful, if you could send it that would be great
 

EMT_20

Member
Premium Subscriber
Joined
Jul 21, 2010
Messages
36
Location
Paris, Texas
If it helps I have a M04 (UHF) manual. Obviously the RF section will be different but the AF/decoder/power supply circuits should be the same.
Could you send me the M04 manual please? Recently saved a unit from my FD that they were going to throw away. Thanks
 

cpg178

Member
Premium Subscriber
Joined
Sep 7, 2014
Messages
413
Thank you! I did not realize that these had an internal antenna on them until looking at the schematics
 
Status
Not open for further replies.
Top