• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Motorola IMPRES 2 Single Unit charger discontinued ??

Not open for further replies.


Oct 9, 2016
Hoping some of the MOTO historians can chime in here.

I looked up the model number on my IMPRES 2 charger (apx variety). Only to find that Model # NTN8845A is discontinued. The current impres 2 single unit charger part numbers are below.

Part Numbers

NNTN8860 - (115 Vac)
NNTN8863- (100-240 Vac)

Looking at my own charger, all the specs look the same, the charger visibly looks identical. Scratching my head here. Anyone know what happened or what the differences are? Thanks.



NY/NJ Database Guy
Database Admin
Oct 4, 2007
NNTN8845A is the part # for the SUC base/cradle itself. The other two part numbers are for the kits that include the power adapter. If you bought a brand new NNTN8860A today, the sticker on the bottom of the charger would say NNTN8845A, as would the included user manual.
Not open for further replies.