joefoss
Member
I have a Low-Band Motorola Syntor X. It works fine. I have it connected to a PIEXX software which changed-out the personality board and was replaced with the PIEXX equivalent so you can control the Syntor frequency range and scan via a lap-top computer. All works well 29 to 53 Mhz. However, I want to take one down to 25 Mhz. No one make any equipment there anymore. I am able to get the Syntor to operate as low as 26.10 Mhz. It would seem easy to get that to move one Mhz. lower. There is nor VCO adjustment as there is on the GE rangers to change ranges with a slight tweek. I would guess that if I were to program the factory EE Prom, the radio would only get it to 26.10 Mhz as well. I be leave the problem is in the VCO. There are a lot of good business frequencies on 25 Mhz I would like to monitor; many radio broadcast remotes operate there as well as some old business users who have kept their old radios. This is a good day-time frequency where you can communicate hundreds of miles (constant skip). Can anyone help me to get this unit on 25 MHz or on the 24 Mhz ham band? Thanks,
Joe
WD8BVL
Battle Creek, MI
Joe
WD8BVL
Battle Creek, MI