• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Motorola Minitor V programming question

Status
Not open for further replies.

portroyalbirdy

Member
Premium Subscriber
Joined
Feb 17, 2010
Messages
222
Location
Central PA
I have a Minitor V programmer that I use to program my departments pagers and anyone that needs it done. However, I need some assistance on how to setup my pager that I have from my department. The question is about On/Off Duty.

I wish to do this if it can be done:
A: Selective Call All tones except EMS alert only
B: Selective Call All tones except EMS Vibe only
C: Monitor F 1 - All tones Vibe/Alert
D. Monitor F 2 - All tones Vibe/Alert
 

SteveC0625

Member
Premium Subscriber
Joined
Oct 24, 2009
Messages
2,574
Location
Northville, NY (Fulton County)
I have a Minitor V programmer that I use to program my departments pagers and anyone that needs it done. However, I need some assistance on how to setup my pager that I have from my department. The question is about On/Off Duty.

I wish to do this if it can be done:
A: Selective Call All tones except EMS alert only
B: Selective Call All tones except EMS Vibe only
C: Monitor F 1 - All tones Vibe/Alert
D. Monitor F 2 - All tones Vibe/Alert
https://drive.google.com/file/d/0BxAVX2o_3yDlcEkyN2FBcXczWDA/edit?usp=sharing

The second page has all the info you will need to program your on/off duty settings.
 
Status
Not open for further replies.
Top