Motorola MTR3000 CPS 1.x, 2.0 Codeplug Issue

[conundrumdg]

I have a Motorola MTR3000 repeater. I also have CPS v16.0 build 828 and CPS 2.0 v2.153.167.0

CPS 2.x throws error [#101005] Codeplug version not supported. Please refer to application help files for supported codeplug versions.
when I try to read, update or recover. Help says I'll need at least v 14.00.00 before CPS 2.0 will work.

CPS 1.x throws error: Error #1067 - Region not supported.
But this is absolutely an NA radio and everything I see supports that.
I can't see anywhere to identify if my CPS 1.x is for North America or not so I'm digging on that.

MOTOTRBO Tuner reads the radio and shows:
Model Number: T3000A
RX Freq Range: 136-174 MHz
TX Freq Range: 136-174 MHz
Firmware Version: R01.09.11
Codeplug Version: 11.00.14
Bootloader Version: R02.03.01
Controller FPGA Version: 02.02.01.01
MAC Address: 84-24-80-03-5A-04
Last Programmed: 10/5/2012 3:29 PM
Region: NA

RDAC also reads it and shows:
Firmware: R01.09.11
Codeplug: 11.00.14

I have put all maintenance on that I can find on the Motorola site and believe I have the latest of all software.

Any ideas how to get past this so I can read the codeplug and configure the radio?

 

[KD9RTX]

Where did you get your copy of CPS 16? Sounds like you ended up with a version from a different region.

 

[conundrumdg]

Yeah that's what I'm leaning towards as well. I pleaded a year ago or so on a forum to find it and a gracious person sent it to me. I can't see anywhere to identify what region it is for. I am registered on the Motorola site but everything they have is CPS 2.0. I guess it's good news that the codeplug may be old enough I can use the Amateur radio friendly CPS 1 v16.x software. Now I just need to find out where I can get one to try and see if that's the issue.

 

[conundrumdg]

Got another copy of the CPS and it now works perfectly. I wish there was a way to see what region the CPS was for. Oh well. Moving on.