Motorola Shuffle Trunk System

[UPMan]

Uniden CC Output mode should be readable for you (slightly different format).

EDIT: Oops, you need an XT, not a T for CC output.

Lacking a dump, you might want to try the other possible values for the channel number from my post in the Uniden thread. Based on the info I have, specific channel mapping is ambiguous given only the frequency (each frequency mathematically resolves to three different possible channel numbers).

 

[RoninJoliet]

OK, i now have audio on the Grundy Co Shuffle system on my GRE500, Upman hit the jackpot...Putting in the system this way using his first set of #'s made it work.....Lo ch-494-Hich-494-offs-494-Base-851.825-St-25.00, Lo ch-465-Hi ch-465-offs-465-Base-852.1875-St-25.00, Lo Ch-427-Hi Ch-427-Offs-427-Base-852.6625-St-25.00, Lo ch-393-Hi ch-393-offs-393-Base-853.0875-St-25.00, Lo ch-347-Hi ch-347-Offs-347-Base-853.6625-St-25.00, Lo ch-440-Hi ch-559-Offs-440-Base-851.025-St-25.00, Lo ch-0-Hi ch-719-Offs-0-Base-851.0125-St-25.00, Lo ch-720-Hi ch-759-Offs-0-Base-848.000-St-25.00, Lo ch-815-Hi-ch-831-Offs-0-Base-846.625-St-25.00, Lo ch-958-Hi ch-958-Offs-958-Base-868.975-St-25.00, Lo ch-961-Hi ch-1022-Offs-0-Base-843.400-St-25.00........It does not seem as sensative but it works....I live 25 miles away from the system....I left out the freqys that are not used on the system....

 

[RoninJoliet]

I have the Grundy Co Shuffle system in two other V-Folders, i tried Upmans second set of rebanding #'s from the Uniden site and "NO audio, i tried his third set of rebanding #'s and again "NO" audio ....So i went back to each VFolder and put in the first set of rebanding #'s as printed in above post and the "audio was back perfect on the GRE500.....

 

[pto]

Grundy Co. Motorola Shuffle

An update,
Ron's 500 seems to be working OK now,
after I went to His house to play.

I know this is the GRE forum but,
I put the tables in My Pro-2096, CPU Ver. 1.1, it seems OK.
With Win 96, I could only put in 6 of the entries and the
plan from Ron has 11.
Doesn't seem to make a difference though.
Ron & I will still try to get the correct CCDump using Win500.

Again, thanks to RoninJoliet, DonS and UPMan for all the help!
Phil

 

[TAK1208]

I'm a neophyte with programing. I've got a RS 96 and 2096. Trying to make heads or tails to cover Grundy County. Can I get some step by step instructions how to setup my scanner. I'm using Win96. Any help will be appreciated.
Thanks,

Tom

 

[RoninJoliet]

Get a list off the database here on this web site of the new freqys Grundy is now using...In your Win96 go to the scanlist you have Grundy programmed and click 800mgz-"extended tables", fill in the first 6 tables i printed in a post just above this one, when finished click "OK" and the tables will go into your 2096,PRO96 in that Grundy bank...the scanner should follow the new system fine....

 

[TAK1208]

Thanks, I figured it out about the same time I sent my post. Really wasn't that hard to work out once I thought about it. Anyway thanks for reply.

 

[ka3jjz]

Since this system is purely analog, the PSR-300, 400 and its RS brothers should be able to trunk it. Do you need to apply all 11 settings for these radios too, or are they a bit different, al a the PRO-96?

This information is needed for the wiki article...

Grundy County Public Safety - The RadioReference Wiki

73 Mike

 

[RoninJoliet]

Mike, as i mentioned in your "Wiki Forum" post, i have reduced my tables in my GRE500 and RS197 to match the 6 tables for the PRO96/2096 and the system works fine....From 11 tables to 6 works on the GRE scanners...I believe they worked for Phil also who has postings on this thread , who actually lives in Morris as i live 20 miles away....

 

[ka3jjz]

That's fine, Ron, I've made the adjustments. Now all that's needed is to find out about the other trunkers, including the PRO-107 - which I forgot to add to the list...73 Mike

 

[jscpac4921]

I travel to Grundy Co. Illinois frequently because my mother lives there. I have a RS Pro-106. I followed this thread and programmed my custom tables as listed by DonS. My scanner is picking up the channel, but no sound. Can you give me some help on any adjustments I need to make in the custom tables or with the Pro-106 scanner. I am using ARC500 software.

 

[RoninJoliet]

The "tables" from DonS for Grundy i could not get to work...Go to this web site and click on "database forum", go to ILL-Grundy Co, click on new info for Grundy Shuffle system, then on that page go to "click wiki" here and it takes you to a new set of tables originated by the Uniden rep for the GRE/RS scanners and they work perfect....

 

[Tommis]

Would the Pro-107 work with the Grundy County Illinois Trunking System??? Thanks Tommis