DSDPlus Motorola Type II Smartnet Help

[tweiss3]

I have DSDPlus Fastlane, and I have been using it with a single RTL-SDR V3 for Ohio MARCS listening. I wanted to try the local city's system which covers electric and parks.

Cuyahoga Falls Trunking System, Cuyahoga Falls, Ohio

Cuyahoga Falls Trunking System Profile

www.radioreference.com

I copied the entire folder just for this. I plugged in the control channel, and adjusted, this is the best I can get for that signal.


I see this when I run 1R.bat

As you see, I tried inverting to see if it helped.

FMP24-CC.bat: FMP24 -rc -i1 -a1 -o20001 -P0.0 -b12.5 -f856.8125
1R.bat: DSDPlus -r1 -T -E -Pwav -i20001 >>1R-log.txt

This is a re-branded system.

What am I missing?

 

[GTR8000]

What am I missing?

The fact that DSD+ does not work with 3600 baud SmartNet/SmartZone systems?

 

[tweiss3]

The fact that DSD+ does not work with 3600 baud SmartNet/SmartZone systems?

That would explain a lot. I must have misread in my searching that the two windows programs that can handle smartnet were Unitrunker and DSD+.

Thanks!

 

[GTR8000]

No problem, sorry for the disappointment. Give Unitrunker a shot, it does pretty well with those systems.

 

[tweiss3]

I started last night with unitrunker, and had a hell of a time getting it set up. Tried multiple versions and them said screw it and went on to DSD+. I do think I have it figured out. I was tracking the system at lunch, but need to actually be home to see if audio is working.

 

[mikewazowski]

I'd recommend TRUNK88.

 

[boatbod]

op25 does smartnet but it's going to need two dongles because the control channel has to be monitored full-time.